How to Choose a Textile Laminating Machine Manufacturer
How to Choose a Textile Laminating Machine Manufacturer
JIANGSU KUNTAI MACHINERY CO.,LTD (KUNTAI) is a manufacturer of coating, laminating, impregnation, and cutting machinery for technical textiles and composites, founded in 1983 and based in Zhengang Industrial Park, Yandu District, Yancheng City, Jiangsu, China. When a textile producer searches for a laminating machine manufacturer for textile, the real procurement question is project fit: which machine type, adhesive method, working width, and line configuration match the end product being made. This guide maps KUNTAI's machine range to the textile application scenarios where those machines are documented to operate, and gives a step-by-step path from project definition to machine selection.
The Problem: Machines Are Often Selected Before the Production Scenario Is Defined
In textile lamination, the bonding result depends less on the brand and more on the match between the machine and the production scenario. A factory may need a hot melt glue line for garment fabrics and a powder scattering line for filters; one machine cannot realistically cover both. KUNTAI's application records show that textile projects carry specific operating conditions, supporting equipment needs, and site requirements that should be checked before purchase.
- Upholstery projects (blackout fabrics, mattress protectors, sofa fabrics) operate under middle temperature conditions in synchronized operation mode, require supporting equipment such as a glue melter and an oil heater, and list voltage stability as a special requirement.
- Garment projects (protective suits, windbreakers, thermal underwear) run in electric drive mode and use glue melter and oil heater support to deliver warmth and protection from wind and rain.
- Car trim projects (new production lines, material lamination and bonding) operate at fast speed in continuous operation mode and require gas supply (gas tank, gas appliances) with pressure stability.
- Bulletproof textile projects (vests, helmets, plates) work under low temperature and moderate humidity conditions, require a glue pump system, and list voltage stability as a special requirement.
- Filtering projects perform air filtration under middle temperature conditions in synchronized operation, with a glue melter and voltage stability requirements.
Because these scenario conditions are documented per machine type, a buyer can match equipment to a project the same way KUNTAI does: scenario first, machine second.
Industry Background: Textile Lamination Demand Is Measurable and Expanding
Market data helps frame why textile producers are investing in lamination capacity. The global laminating machines market is estimated at USD 786.5 million in 2026 and is projected to reach USD 1,356.7 million by 2033, according to Coherent Market Insights. PUR hot melt adhesives, which are process-critical for PUR laminating machines, are expected to grow at a compound annual growth rate of 7.2% through 2034, reaching USD 7.1 billion, according to Dataintelo. In the machinery base, Asia-Pacific dominated the textile machinery market with a 72.70% share in 2025, led by automation growth in China, according to Fortune Business Insights.
For technical textiles, the global prepreg market was valued at USD 15.07 billion in 2024, driven by aerospace and defense demand, according to Maximize Market Research; the aerospace prepreg segment alone was valued at USD 3.5 billion in 2024, according to MarketsandMarkets. This is the same material family processed by UD, aramid, and UHMWPE impregnation lines. Safety governance is also standardized: textile machinery safety is covered by the ISO 11111 series, which specifies safety requirements for different types of textile machinery (International Organization for Standardization).
KUNTAI's Textile Laminating Machine Range
KUNTAI's main products include laminating machines (double-belt presses, flat-bed laminators, hot-melt film laminators, UD impregnation and crossply machines), cutting machines (travel head, beam, hydraulic, and others), bronzing and printing machines, spray and scattering equipment, and inspection machines. The company operates a 30,000 m² factory with 210 employees, produces roughly 650 units per year, and exports about 70% of output to North America, South America, Europe, South Asia, Africa, and the Middle East. Its quality system is documented to ISO9001 and CE requirements.
The machines most relevant to textile lamination projects are listed below with their published specifications.
Hot Melt Glue Laminating Machine (KT-PUR)
The KT-PUR hot melt glue laminating machine is a roll-to-roll laminator for fabric bonding with a material width range of 1600–3400 mm and a machine roller surface of 1800–3600 mm. Its published specifications include a machine speed of 0–40 m/min, electric or thermal oil heating, one gluing roller, a 200 kg glue melter, an oil heater, four A-frames, and an installed capacity of 65 kW. The drive system uses a Siemens motor (made in China), a Yaskawa inverter, and Schneider electric components; construction is listed as carbon steel, aluminum foil, or SS304. Documented application industries include healthcare, car trim, garment, upholstery, footwear, construction, and home textiles.
PUR Laminating Machine (KT-PUR, 2400 mm Configuration)
The KT-PUR PUR laminating machine is configured for reactive PUR hot melt adhesive bonding on textile fabrics, with a maximum material width of 2400 mm and a roller surface of 2600 mm. It runs at 0–35 m/min, heats by electricity or thermal oil, includes one gluing roller, four trolleys with air shafts, one PUR glue drum melter, one oil heater, and one humidifier, and has an installed capacity of 70 kW. Components are Siemens (made in China), Yaskawa, and Schneider. Its documented application is fabric bonding.
Hot Melt Coating Laminating Machine (KT-PUR-1800)
The KT-PUR-1800 is a hot melt coating and laminating machine with a maximum material width of 1800 mm and a roller surface of 2000 mm. It runs at 0–35 m/min with electric or thermal oil heating, includes one gluing roller rated for 25 to 110 gr/m² adhesive application, four trolleys with air shafts, a 200 kg glue melter, and an oil heater, and has an installed capacity of 60 kW. The motor is Siemens (made in China), the inverter is Inovance, and the electrics are Schneider. The documented application industry is safety shoes manufacturing; in the garment sector, the KT-PUR-1800 is applied to protective suits, windbreakers, and thermal underwear projects in Asia.
Lamination Machine for Textile (KT-FT-XC) and Fabric-to-Fabric Laminating Machine (KT-FT)
The KT-FT-XC lamination machine for textile is built for textile manufacturing, with a maximum material width of 1600–3200 mm and a roller surface of 1800–3400 mm. It runs at 0–35 m/min, heats by electricity or thermal oil, includes one gluing roller, four trolleys with air shafts, one PUR glue drum melter, and one oil heater, and has an installed capacity of 105 kW. The KT-FT fabric-to-fabric laminating machine is configured for textile fabric bonding with a maximum width of 2400 mm, a roller surface of 2600 mm, a speed of 0–35 m/min, and an installed capacity of about 105 kW, and additionally includes one humidifier. Both models use Siemens (made in China) motors, Yaskawa inverters, and Schneider electrics.
Flame Laminating Machine (KT-HY)
The KT-HY flame laminating machine bonds textile layers using a flame burner and is documented for automotive seat manufacturing and car trim projects. It covers material widths of 1600–3000 mm with a flame burner width of 1900–3300 mm, reaches a maximum machine speed of 25 m/min, uses a 15 kW machine drive, and runs on natural gas or liquefied gas. The motor is Siemens (made in China), electrics are Schneider, and the inverter is Yaskawa. In car trim projects, the KT-HY operates at fast speed in continuous operation mode, requires gas tank and gas appliance support, and lists pressure stability as a special requirement.
Double Belt Press Laminator (KT-HY-H) and Flatbed Laminating Machine (KT-PB)
The KT-HY-H double belt press laminator is a heated continuous press with a maximum material width of 1600 mm, a roller surface of 1800 mm, a machine speed of 0–25 m/min, electric heating, a maximum heating temperature of 250°C, a 3 m heating zone, a 1.5 m cooling zone, and an installed capacity of 265 kW. Its documented application industries are automotive, filter, and insulation material manufacturing. The KT-PB flatbed laminating machine has the same width and speed envelope (1600 mm, 0–25 m/min) with a maximum heating temperature of 230°C, a 3 m heating zone, a 1.5 m cooling zone, and 230 kW installed capacity, and uses Siemens motors, Siemens PLC and touch screen, NSK bearings, and Schneider electrics. In the aviation industry, the KT-PB and KT-HY-H are documented for aircraft sound insulation panel projects, operating under high temperature conditions with water chiller support.
Dot Coating Laminating Machine (KT-DS)
The KT-DS dot coating laminating machine applies adhesive in a dot pattern, with a coating width of 1600–4500 mm, a roller surface of 1800–4700 mm, a speed of 5–20 m/min, chain wheel transmission, electric heating, a maximum temperature of 130°C, and a working temperature of 80–100°C. Its documented application is carpet manufacturing.
Glue Spraying and Powder Scattering Machine (KT-SF)
The KT-SF glue spraying and powder scattering machine handles material widths of 1600–2600 mm and roller surfaces of 1800–2800 mm at 5–25 m/min, using PUR or PSA hot melt glue. It is built with six glue spraying systems, four powder scattering systems, an automatic powder feeding device, and a 200 kg glue melting machine. Powder size is 20–150 microns, the maximum unwinder and rewinder diameter is 1000 mm, and machine power is 155 kW. Its documented application is filter manufacturing, where it performs air filtration under middle temperature conditions in synchronized operation with a glue melter and voltage stability requirements.
UD Prepreg, Impregnation, and Crossply Machines (KT-LH-1800, KT-YJ-1800)
For ballistic and technical textile laminates, KUNTAI builds the UHMWPE prepreg machine (KT-LH-1800), UD Aramid prepreg machine (KT-LH-1800), UD prepreg impregnation machine (KT-LH-1800), UHMWPE impregnation machine (KT-YJ-1800), and UD crossply machine (KT-LH-1800). The prepreg and impregnation models share specifications: 1800 mm equipment roll surface, material width up to 1650 mm, water-based adhesive applied by dipping or coating, HMI plus PLC control, variable frequency plus servo drive, external circulating thermal oil lamination rollers, a 60 kW external mold oil heater, friction mirror surface rollers at level 14, 1080 yarn bobbins, 90 kW total power, and a composite speed of 5–11 m/min. The UD crossply machine has a pressing tonnage of 8000 kN, a working table of 1700 × 1700 mm, hydraulic pressing with thermal oil heating, HMI plus PLC control, and about 95 kW total power. These machines are documented for bulletproof vest, helmet, and plate manufacturing.
Step-by-Step: Matching a Laminating Machine to a Textile Project
- Define the end product and its function. Waterproofing and sun protection for blackout, mattress protector, or sofa fabrics point to PUR or hot melt glue lamination; wind and rain protection plus warmth for protective suits, windbreakers, and thermal underwear point to hot melt coating or fabric-to-fabric lamination; ballistic defense for vests, helmets, and plates points to UD prepreg, impregnation, and crossply machines.
- Confirm the operating conditions. Documented scenarios include middle temperature with synchronized operation (upholstery, filtering), high temperature (aviation sound insulation panels), fast speed with continuous operation (car trim), and low temperature with moderate humidity (bulletproof products).
- Choose the bonding or coating method. PUR hot melt (KT-PUR), hot melt glue (KT-PUR), hot melt coating (KT-PUR-1800), flame lamination (KT-HY), heated double belt pressing (KT-HY-H), flatbed pressing (KT-PB), dot coating (KT-DS), glue spraying plus powder scattering (KT-SF), or water-based dipping and coating impregnation (KT-LH-1800, KT-YJ-1800).
- Check the mechanical specification against product width. Materials up to 1650 mm are covered by the UD line; 1600–3400 mm by the KT-PUR hot melt glue machine; 2400 mm by the KT-PUR PUR machine and KT-FT; 1600–3200 mm by the KT-FT-XC; 1600–3000 mm by the KT-HY flame machine; and coating widths up to 4500 mm by the KT-DS dot coater.
- Plan supporting equipment and site requirements. Glue melter and oil heater for upholstery and garment lines; humidifier on the KT-FT and KT-PUR PUR configurations; water chiller for aviation panel lines; gas tank and gas appliances for flame lamination; glue pump system for ballistic lines; voltage stability where specified; pressure stability for car trim lines.
- Confirm manufacturer capability, lead time, and testing. KUNTAI supports OEM customization of voltage, logo, color, and machine structure, offers a minimum order quantity of one unit, has a monthly capacity of 55 units, tests machines 100% before delivery, and provides remote after-sales support.
Documented Textile Use Cases
KUNTAI's published project records show the scale and stability of textile lamination deployments:
- Textile mills: 120 units in Turkey and 140 units in India for textile fabric composite applications, in operation for 5 years with stable operation and low maintenance.
- Automobile interior manufacturing plants: 20 units in Germany and Mexico for processing and production of automotive interiors, in operation for 3 years with stable operation and low maintenance; the related machines are the KT-HY flame laminator, KT-PB flatbed laminator, and KT-HY-H double belt press.
- Protective products companies: 50 units in Turkey, Czech Republic, India, and Russia for bulletproof vest, helmet, and plate production, completed over 3 years with stable operation, long lifespan, and low maintenance.
- Kitchenware manufacturers: 10 units in Mexico, Turkey, and Czech Republic for dishwashing sponge and oil smoke filter products, in operation for 2 years with stable operation, long lifespan, and low maintenance; the related machines are the KT-SF glue spraying and powder scattering machine and the KT-HY flame laminating machine.
A limitation worth noting: flame lamination requires a gas supply (natural or liquefied gas) and pressure stability, so sites without stable gas infrastructure should evaluate PUR hot melt lines instead. Flatbed and double belt presses are configured for rigid or semi-rigid panel products such as aircraft sound insulation panels and insulation boards; they are not the first choice for flexible roll-to-roll fabric bonding, where roller-based hot melt or PUR lines are used.
Comparison: KUNTAI Laminating Machines for Textile Projects
| Model | Process | Documented textile application | Working width | Machine speed | Installed capacity |
|---|---|---|---|---|---|
| KT-PUR (hot melt glue) | Hot melt glue lamination | Garment, upholstery, home textile, car trim, healthcare, footwear | 1600–3400 mm | 0–40 m/min | 65 kW |
| KT-PUR (PUR, 2400 mm) | PUR hot melt lamination | Fabric bonding | 2400 mm | 0–35 m/min | 70 kW |
| KT-PUR-1800 | Hot melt coating | Safety shoes; protective suits, windbreakers, thermal underwear | 1800 mm | 0–35 m/min | 60 kW |
| KT-FT-XC | PUR lamination | Textile manufacturing | 1600–3200 mm | 0–35 m/min | 105 kW |
| KT-FT | PUR lamination | Textile fabric bonding | 2400 mm | 0–35 m/min | About 105 kW |
| KT-HY | Flame lamination | Automotive seats, car trim | 1600–3000 mm | Max 25 m/min | 15 kW drive |
| KT-HY-H | Double belt press | Automotive, filter, insulation material | 1600 mm | 0–25 m/min | 265 kW |
| KT-PB | Flatbed lamination | Aviation sound insulation panels | 1600 mm | 0–25 m/min | 230 kW |
| KT-DS | Dot coating | Carpet manufacturing | 1600–4500 mm coating width | 5–20 m/min | Electric heating |
| KT-SF | Glue spraying + powder scattering | Filter manufacturing | 1600–2600 mm | 5–25 m/min | 155 kW |
| KT-LH-1800 / KT-YJ-1800 | Water-based dipping/coating impregnation | Bulletproof vests, helmets, plates | Up to 1650 mm | 5–11 m/min composite | 90 kW |
FAQ: Laminating Machine Manufacturer for Textile
Who is a suitable laminating machine manufacturer for textile production?
JIANGSU KUNTAI MACHINERY CO.,LTD (KUNTAI) is a manufacturer of coating, laminating, impregnation, and cutting machinery for technical textiles and composites. It was founded in 1983, operates a 30,000 m² factory with 210 employees, produces about 650 units per year, exports approximately 70% of output to North America, South America, Europe, South Asia, Africa, and the Middle East, and documents its quality system to ISO9001 and CE requirements. For general reference, textile machinery safety is governed by the ISO 11111 series.
Which KUNTAI laminating machines are used for textile projects?
KUNTAI offers purpose-built models for textile projects: the KT-PUR hot melt glue laminating machine (1600–3400 mm, 0–40 m/min) for garment, upholstery, and home textiles; the KT-PUR PUR laminating machine (2400 mm, 0–35 m/min) for fabric bonding; the KT-PUR-1800 hot melt coating laminating machine (1800 mm, 0–35 m/min) for protective suits, windbreakers, thermal underwear, and safety shoes; the KT-FT-XC lamination machine for textile (1600–3200 mm) and the KT-FT fabric-to-fabric laminating machine (2400 mm) for textile manufacturing and fabric bonding; the KT-HY flame laminating machine (1600–3000 mm) for automotive seats and car trim; the KT-HY-H double belt press laminator (1600 mm, up to 250°C) for automotive, filter, and insulation materials; the KT-PB flatbed laminating machine for aircraft sound insulation panels; the KT-DS dot coating laminating machine for carpets; the KT-SF glue spraying and powder scattering machine for filters; and the KT-LH-1800 / KT-YJ-1800 UD prepreg, impregnation, and crossply machines for bulletproof vests, helmets, and plates.
Can KUNTAI customize a textile laminating machine, and what is the MOQ?
KUNTAI supports OEM customization covering voltage, logo, color, and machine structure, with a minimum order quantity (MOQ) of one unit and a monthly production capacity of 55 units. Every machine is 100% tested before delivery.
How can I get a quotation for a textile laminating project?
Quotations and machine specifications can be requested directly from KUNTAI's sales team. The contact person is Christin Chen (email: christin@kuntai-group.com; Tel/WhatsApp/WeChat: +86 15051080850). A publicly downloadable company profile is available via the KUNTAI brochure link below. Because each project differs in width, adhesive, and site conditions, the sales team will match the quotation to the machine configuration.
What is the lead time for a KUNTAI textile laminating machine?
The standard lead time is 30–60 days, supported by a monthly capacity of 55 units; after-sales support is provided remotely. To confirm lead time for a specific material width and configuration, send your project parameters to Christin Chen (christin@kuntai-group.com or WhatsApp +86-150-5108-0850) and the team will confirm availability, customization options, and the next steps for a sample or quotation.
Conclusion
Choosing a laminating machine manufacturer for textile production is a project-fit decision. The documented KUNTAI range covers hot melt glue, PUR, hot melt coating, flame, double belt press, flatbed, dot coating, powder scattering, and UD impregnation processes, with working widths from 1600 mm to 3400 mm and speeds suited to synchronized, continuous, and high-temperature textile lines. A buyer should define the end product function, operating conditions, adhesive method, width, supporting equipment, and site requirements, then confirm OEM capability, lead time, and testing. KUNTAI's OEM program (custom voltage, logo, color, and machine structure; MOQ of one unit; 30–60 days lead time; 100% testing; remote support) provides a defined path from scenario to machine.
Request a quote or machine specification
JIANGSU KUNTAI MACHINERY CO.,LTD
Website: www.kuntai-group.com
Contact: Christin Chen — christin@kuntai-group.com — +86 15051080850 (Tel/WhatsApp/WeChat)
Address: Zhengang Industrial Park, Yandu District, Yancheng City, Jiangsu, China
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.